VA Imaging MER3-1220-24G3C-P-VA 1/1.7" Color CMOS (Sony IMX226) Camera, 12 Megapixels, 4024 x 3036, 24 fps, Rolling Shutter, C-Mount, 2.5GigE Output

2.5GIGE VISION CAMERA IMX226

The MER3-1220-24G3C-P belongs to the MER3 2.5GigE lineup. It is an industrial-grade GigE vision camera featuring a 2.5GigE connection. GigE is widely recognized as the standard interface for cameras in conventional machine vision setups. The MER3 series offers high-resolution options for both global and rolling shutter sensors.
This particular unit is suitable if your requirements include:

- An industrial-grade camera
- Cable runs up to 100 meters
- Cost-effective and straightforward cable installation
- Single cable connectivity for device operation
- Physical dimensions of 29x29x50.6mm

For additional information, please refer to the MER3 2.5GigE user manual.

COLOR INDUSTRIAL CAMERA

This industrial color camera utilizes a Bayer filter array to generate color images. The RGB values for each pixel are derived by processing the pixel s value along with those of its neighboring pixels. This approach typically results in images that are less sharp compared to monochrome cameras.
Because of the RGB filter on each pixel, under white light conditions, every pixel captures approximately 66% fewer photons than a monochrome sensor, making color cameras less sensitive to light. To address this limitation, the following adjustments can be made:

- Enhance illumination intensity
- Increase sensor gain
- Extend shutter speed or exposure duration
- Choose a sensor with higher light sensitivity
- Opt for a lens designed for better light transmission

Color industrial cameras are preferred in scenarios where capturing color details is essential.

POE INDUSTRIAL CAMERA

Power over Ethernet (PoE) technology for GigE enables simultaneous delivery of power and data through a single Ethernet cable. This simplifies wiring and reduces setup time in applications that do not require hardware triggers or I/O connections. For applications needing I/O functionality, powering the camera via an I/O connector is recommended. Cameras powered by PoE consume more power and generate additional heat compared to those powered through I/O connectors. The PoE-enabled GigE camera is physically larger than its non-PoE counterpart due to an extra PCB that separates Ethernet power from data signals and steps down voltage. This additional hardware increases cost. The main benefit of PoE is streamlined installation with fewer cables.

MTBF, WARRANTY & PRODUCT LIFE CYCLE

Daheng Imaging manufactures over 100,000 industrial cameras annually, adhering to stringent quality standards. The mean time between failure (MTBF) exceeds 400,000 hours (equivalent to 45 years of continuous operation). These industrial cameras hold TÜV Rheinland certification and come with a 3-year warranty. Each camera model remains available for a minimum of 7 years after its market release, with many models supported for significantly longer periods. Learn more about our approach to product life cycle management in this article.