Sentech STC-SCS312POE 1/1.8" CMOS (IMX265) Progressive Scan Color Camera, 3.2 Megapixels, 2048 H x 1536 V, 33.3 fps, C-Mount, Power over Ethernet, GigE Vision

Model #
STC-SCS312POE

Availability
Typically 2-4 days lead-time

Shipping

We are not currently offering this item.

DESCRIPTION

Technical Information

Sentech STC-SCS312POE 1/1.8" CMOS (IMX265) Progressive Scan Color Camera, 3.2 Megapixels, 2048 H x 1536 V, 33.3 fps, C-Mount, Power over Ethernet, GigE Vision

Resolution: 2048 H x 1536 V

Imager Size: 1/1.8"

Output: Gigabit Ethernet (GigE Vision)

Color/Monochrome: Color

Mount: C-Mount

Additional Information

1/1.8” Color Progressive CMOS
Sony CMOS Sensor
3.2 MP Resolution
Global Shutter

GigE Vision, CMOS, 3.2 MP, Color, Cased

Sentech is releasing a brand new GigE Vision, 3.2 MP color GigE Vision camera. The STC-SCS312POE features 33.3 FPS, and a dazzling 3.2 MP resolution. Utilizing CMOS Global Shutter, the STC-SCS312POE is capable of capturing moving objects without any motion blur. By utilizing the GigE Vision interface, speed and power have never been easier to use.

Imaging


Model No	STC-SCS312POE
Imager	1/1.8” 3.2M color progressive CMOS (Sony: IMX265)
Shutter Type	Global Shutter
Active Picture Element	2048 (H) x 1536 (V)
Cell Size	3.45 (H) x 3.45 (V) µm

Function

Scanning System	Progressive
Scanning Mode	Full Scanning (Full resolution) / ROI
Frame Rate	8bit:33.3 fps、10bit:16.6fps、10bitPacked:22.2fps、 12bit:16.6fps、12bitPacked:22.2fps; Maximum frame rate is 2083fps@264 x 4(8bit)
ADC bit depth	12 bit
Video Output Format	BayerBG8, BayerBG10, BayerBG10Packed, BayerBG12, BayerBG12Packed
Noise Level	-
- @ 8 Bit Output	≤ 3 Digit (Gain 0 dB)
- @ 10 Bit Output	≤ 12 Digit (Gain 0 dB)
- @ 12 Bit Output	<= 48 Digit (Gain 0 dB)
Sensitivity	780 Lux
ALC	Auto shutter / Auto gain (AGC) / OFF (Default: Auto shutter OFF, AGC OFF)
Electronic Shutter	30 useconds to 16,777,215 useconds (8bit) 35 useconds to 16,777,215 useconds (10bit,12bit)
Gain	-
- Analog	0 to 20.8 dB (Default: 0dB)
- Digital	0 to 6 dB (Default: 0dB
ROI	Horizontal: 264 to 2048 pixels / Vertical: 4 to 1536 pixels (Default: 2048 x 1536); Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction; Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction
Gamma	Gamma 1.0 or uploadable gamma table (Default:1.0)
Binning Function	Not supported
Decimation Function	Individual x2 Horizontal, Vertical Decimation
Mirror Image	Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Blemish Correction	Up to 64 points
White Balance	Auto / Manual / Push to Set (Default: Manual)
Operational Mode	Edge preset trigger / Pulse width trigger(more than 13.3333uS(8bit), 17.77778uS(10bit,12bit))
Communication	UART Communication through Ethernet port
Interface	IEEE802.3af CLASS2 (1000BASE-T)
Protocol	GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4)
I/O	One opt-isolated input and two open collector outputs
Power	-
- Input Voltage	+ 10.8 ~ 26.4 Vdc
- Consumption (Max / Default)	+12V: 2.9 W, 24V:3.3 PoE: 3.5 W

Mechanical

Dimensions	35 (W) x 35 (H) x 53.4 (D) mm *
Optical Filter	No Filter
Optical Center Accuracy	Positional accuracy in Horizontal and Vertical directions:: ±0.3 mm Rotational accuracy of Horizontal and Vertical: ±2.0 deg.
Material	Aluminum Alloy(AC)
Lens Mount	C Mount
Connections	RJ45 connector Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent
Camera Mount Screws	Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)
Weight	Approx. 100g