Loading... Please wait...
RMA Electronics
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Sentech STC-SCA503POE 1/2.5" CMOS Progressive Scan Color Camera, 5 Megapixels, 2592 H x 1944 V, 14 fps, C-Mount, Power over Ethernet, GigE Vision

Model #
SENT STC-SCA503POE
Availability
Typically 2-4 days lead-time
Shipping
We are not currently offering this item.


Technical Information

Resolution:  2592 H x 1944 V 

Imager Size: 1/2.5"

Output: GigE (GigE Vision)

Color/Monochrome: Color

Mount: C-Mount

 

Additional Information

GigE Aptina PoE, QSXGA, Color, Cased

  • 1/2.5" CMOS Sensor
  • 5MP ~ VGA Scalable Resolution
  • GigE Vision® 1.2 and GenICam™ 1.4 Compliant

The STC-SCA503POE is part of Sentech's Brand New Power over Ethernet GigE cameras, featuring an Aptina CMOS Sensor. It features a 1/2.5" color QSXGA sensor, 15 fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SCA503POE boasts a compact 35(w) x 35(H) x 53.5 (D) mm size.  This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost. 

 

Specifications

Imaging

 

Model No

STC-SCA503POE

Image Sensor

1/2.5" 5 MP CMOS; (Aptina: MT9P031/12STM)

Active Picture Element

2592 (H) x 1944 (V)

Cell Size

2.2 (H) x 2.2 (V) µm

Scanning System

Progressive

 

Function

 

Shutter Type

Rolling Shutter / Global Shutter

Scan Mode

Full Scan / AOI

Vertical Frequency (Frame Rate)

QSXGA: 2592 (H) x 1944 (V): 14 FPS

Video Output

BGR8bit, RAW8bit/10bit/12bit, BayerRG10Packed/12Packed

- Noise Level: @ 10 bit output

<= 13 Digit (Gain 0 dB)

Minimum Scene Illumination

16 Lux @ F1.2,14 Hz

ALC

AE and AGC (ON/OFF)

Exposure Time

Preset continuous mode: 32 useconds to 16,777,215 mseconds, Preset trigger mode: 32 useconds to 16,777,215 mseconds, TriggerWidth (Pulse width) mode: 32 useconds to Non-limit mseconds

Gain

-

- Analog (Gain)

0 ~ 7.51 dB

- Digital (Gain)

Up to 18.69

Gamma

Gamma 1.0 (Factory default) or downloadable gamma table (Default:1)

AOI Function

AOI (H: 32 to 2592 Pixel / V: 32 to 1944 Line) Unit: H 8 Pixel / V 2 Line

Binning

H: 1/2, V: 1/2, 1/4

Decimation(Skipping)

Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7

Flip Image

N/A

Pixel Blemish Correction

Maximum 64 points (Default:ON)

White Balance

Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF)

Operating Mode

Free Run, Edge preset trigger, Trigger Width (Pulse width) (Default:OFF)

Protocol

IEEE802.3 (1000BASE-T)

Communication

GigE Vision® 1.2 and GenICam™ 1.4 Compliant

I/Os

One opt-isolated input and two open collector outputs(+3.3V)

Power

-

- Input Voltage

+10.8 to +26.4 Vdc (IO Connector) or Power Over Ethernet(IEEE802.3af compliance) 

- Consumption

Power over Ethernet: Less than 3.0 W, +12Vdc: Less than 3.2 W


 

Mechanical

 

Dimensions

35 (W) x 35 (H) x 53.5 (D) mm excluding connectors

Optical Filter

No Filter

Optical Center Accuracy

Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg

Material

Aluminum (AC)

Lens Mount

C Mount

Connectors

RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent

Camera Mount Screws

Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)

Weight

Approx. 97g

 

Environmental

 

Operating Temperature

-

- Minimum

Environmental Temperature: -5°C

- Maximum

Camera housing temperature (top plate) shall not exceed 65°C (This corresponds to an environmental temperature of approx. 40°C)

Storage Temperature

Environmental Temperature -30 ~ 65°C

Vibration

20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each

Shock

Acceleration: 38G, half amplitude 6 ms, 3 times, XYZ each direction

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant

 

pdf-icon.png