Loading... Please wait...
RMA Electronics
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Sentech STC-SC152POEHS 1/2" CCD Progressive Scan Color Camera, 1.4 Megapixels, 1360 H x 1040 V, 34 fps, C-Mount, Power over Ethernet, GigE Vision

$681.00
Model #:
STC-SC152POEHS
Availability:
Typically 2-4 days lead-time
Shipping:
Calculated at checkout
Quantity:

Technical Information

Resolution:  1360 H x 1040 V (1.4 Megapixels)

Imager Size: 1/2"

Output: Gigabit Ethernet (GigE Vision)

Color/Monochrome: Color

Mount: C-Mount

 

Additional Information

Imager
1/2” interline SXGA color progressive CCD: ICX267AK
Total Picture Element
1434 (H) x 1050 (V)
Active Picture Element
SXGA: 1360 (H) x 1040 (V)
Chip Size
7.6 (H) x 6.2 (V) mm
Cell Size
4.65 (H) x 4.65 (V) um
Scanning System
Progressive
Vertical Frequency
34.23358 Hz at full resolution; 0.55789 to 139.93433 Hz changeable via the communication; Maximum frame rate is dependent on the AOI setting; Maximum frame rate of the camera (139.93433 Hz) is 104 vertical resolution AOI setting.
Horizontal Frequency
34.0860 Hz
Pixel Frequency
65.453333 MHz
Noise Level
-
- @ 8Bit Output
<= 3 Digit (Gain 0 dB)
- @ 10Bit Output
<= 12 Digit (Gain 0 dB)
- @ 12Bit Output
<= 48 Digit (gain 0 dB)
Minimum Scene Illumination
16.3 Lux at F1.2, 34.23358 Hz
Sync System
Internal
Video Output
Digital 8 ,10 or 12 bit Raw Data or RGB 8 bit
Interface
PoE: IEEE802.3af CLASS3 (1000BASE-T)
Protocol
GigE Vision 1.2 and GeniCam 2.0 compliant
Exposure Time
Preset continuous mode: 10 seconds to 16,777,216 seconds; Preset trigger mode: 10 seconds to 16,777,216 seconds; Pulse width mode: 10 seconds to Unlimited.
ALC
Electronic iris and AGC (ON/OFF)
Gain
0 to 18.309 dB
Gamma
Gamma 1.0 (Factory default) or downloadable gamma table
AOI (Area of Interest) Function
Programmable AOI setting via the communication
Smear Reduction
Selectable ON/OFF via the communication
Color Interpolation
Available on RGB output
White Balance
Auto, Manual, and push to set white balance is available on both Raw Data output and RGB output.
Trigger Mode
Edge preset trigger, pulse width trigger (unlimited exposure time)
Communication
UART communication through Ethernet Port
I/Os
One opt isolated input and two open collector outputs
Power
-
- Input Voltage
+10.8 to +26.4Vdc through power/IO connector or Power Over Ethernet; (Auto detection with power/IO connector prioritized)
- Consumption
12V: 3.5W / 3.2W, PoE: 3.7W / 3.5W
Dimensions
35 (W) x 35 (H) x 57.3 (D) mm excluding connectors
Optical Filter
IR cut filter on
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.3 mm; Rotational accuracy of H and V: +/- 1.5 deg.
Material
Aluminum (AC)
Lens Mount
C Mount
Connectors
RJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount Screws
Two ¼” Tripod screw holes (one each on top and bottom plate); Twelve M4 screw holes (four each on top, bottom, and two each on both side plates)
Weight
Approx. 130
Operating Temperature
 
- Minimum
Environmental Temperature: -5 deg. C
- Maximum
Environmental Temperature: 35 deg. C or camera housing temperature (Top Plate) : 65 deg. C
Storage Temperature
Environmental Temperature: -30 to 65 deg. C
Vibration
20Hz to 200Hz to 20Hz (5min/cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions, 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS compliant

 

pdf-icon.png

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review