Loading... Please wait...
RMA Electronics
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Sentech STC-SBS231POE 1/1.2" CMOS (Sony IMX249) Progressive Scan Monochrome Camera, 2.3 Megapixels, 1920 H x 1200 V, 41.6 fps, Global Shutter, C-Mount, Power over Ethernet, GigE Vision

Model #
SENT STC-SBS231POE
Availability
Typically 2-3 Days for Shipment
Shipping
Calculated at checkout
$568.00
Quantity


Technical Information

Resolution:  1920 H x 1200 V 

Imager Size: 1/1.2" (Sony IMX249)

Output: GigE

Color/Monochrome: Monochrome

Mount: C-Mount

 

Additional Information


The STC-SBS231POE features 41.6 FPS, and a dazzling 2.3 MP resolution. Utilizing CMOS Global Shutter, the STC-SBS231POE is capable of capturing moving objects without any motion blur. By utilizing the GigE Vision interface, speed and power have never been easier to use.

 

Specifications

 

Imaging

 

Model No

STC-SBS231POE

Imager

1/1.2" 2.3 MP monochrome progressive CMOS (Sony: IMX249)

Shutter Type

Global Shutter

Active Picture Element

1920 (H) x 1200 (V)

Cell Size

5.86 (H) x 5.86 (V) μm

 

Function

 

Scanning System

Progressive

Scanning Mode

Full Scanning (Full resolution) / ROI

Frame Rate

Mono8/10/12

ADC bit depth

12bit, 10bit

Video Output Format

Mono8/10/12

Noise Level

-

- @ 8 Bit Output

≤ 1.5 Digit (Gain 0 dB)

- @ 10 Bit Output

≤ 6 Digit (Gain 0 dB)

- @ 12 Bit Output

≤ 24 Digit (Gain 0 dB)

Sensitivity

580 Lux

ALC

Auto shutter / Auto gain (AGC) / Manual (Default: Auto shutter OFF, AGC OFF)

Electronic Shutter

2bit: Edge preset trigger, Free run: 34 useconds to 16,777,215 useconds; Pulse width trigger: 25 useconds to 16,777,215 useconds; 8bit,10bit: Edge preset trigger, Free run: 39 useconds to 16,777,215 useconds; Pulse width trigger: 20 useconds to 16,777,215 useconds;

Gain

-

- Analog

0 to 24 dB (Default: 0dB)

- Digital

0 to 6 dB (Default: 0dB)

ROI

Horizontal: 16 to 1920 pixels / Vertical: 2 to 1200 pixels (Default: 1920 x 1200), Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction, Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction

Gamma

Gamma 1.0 or uploadable gamma table (Default:1.0)

Binning Function

Not supported

Decimation Function

Individual x2 Horizontal, Vertical decimation

Mirror Image

Horizontal / Vertical / Horizontal and Vertical (Default: OFF)

ROI Function

Variable ROI setting through the communication.

White Balance

Auto / Manual / Push to Set (Default: Manual)

Operating Mode

Free-run / Edge-Preset Trigger / Pulse Width Trigger (Default: Free-run)

Communication

UART Communication through Ethernet port

Interface

IEEE802.3af CLASS2 (1000BASE-T)

Protocol

GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4)

I/O

One opt-isolated input and two open collector outputs

Power

-

- Input Voltage

+ 10.8 ~ 26.4 Vdc

- Consumption

- Consumption (Max/Default)

 

Mechanical

 

Dimensions

35 (W) x 35 (H) x 53.7 (D) mm *

Optical Filter

IR cut filter

Optical Center Accuracy

Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg.

Material

Aluminum (AC)

Lens Mount

C Mount

Connections

RJ45 connector Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent

Camera Mount Screws

Two 1/2'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)

Weight

Approx. 100g

 

Environmental

 

Operating Temperature

-

- Minimum

Environmental Temperature: 0 deg. ºC

- Maximum

Camera housing temperature (top plate) shall not exceed 60⁰C (This corresponds to an environmental temperature of approximately 40⁰C)

Storage Temperature

Environmental Temperature: -20°C to 65°C

Storage Humidity

Less than 85%

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each

Shock

Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant

 

pdf-icon.png