Loading... Please wait...
RMA Electronics
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Sentech STC-SB33POEHS 1/3" CCD Progressive Scan Monochrome Camera, VGA, 648 H x 494 V, 120 fps, C-Mount, Power over Ethernet, GigE Vision

$460.00
Model #:
STC-SB33POEHS
Availability:
Typically 2-4 days lead-time
Shipping:
Calculated at checkout
Quantity:

Technical Information

Resolution:  648 H x 494 V (VGA)

Imager Size: 1/3"

Output: Gigabit Ethernet (GigE Vision)

Color/Monochrome: Monochrome

Mount: C-Mount

 

Additional Information

Imager
1/3" interline VGA: monochrome progressive scan CCD: ICX424AL
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
VGA: 648 (H) x 494 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.4 (H) x 7.4 (V) um
Scanning System
Progressive
Vertical Frequency
120 Hz at full resolution; 0.96036 to 480.4355 Hz changeable via the communication; Maximum frame rate is dependent on the AOI setting; Maximum frame rate of the camera (480.4355 Hz) is 104 vertical resolution AOI setting
Horizontal Frequency
62.93705 Hz
Pixel Frequency
49.09090 MHz
Noise Level
-
- @ 8Bit Output
<= 3 Digit (Gain 0 dB)
- @ 10Bit Output
<= 12 Digit (Gain 0 dB)
- @ 12Bit Output
<= 48 Digit (gain 0 dB)
Minimum Scene Illumination
0.58 Lux at F1.2, 89.91172 Hz
Sync System
Internal
Video Output
Digital 8 ,10 ,12 bit Raw Data
Interface
PoE: IEEE802.3af CLASS3 (1000BASE-T)
Protocol
GigE Vision 1.2 and GeniCam 2.0 compliant
Exposure Time
Preset continuous mode: 10 seconds to 16,777,216 seconds; Preset trigger mode: 10 seconds to 16,777,216 seconds; Pulse width mode: 10 seconds to Unlimited.
ALC
Electronic iris and AGC (ON/OFF)
Gain
0 to 20.4 dB
Gamma
Gamma 1.0 (Factory default) or downloadable gamma table
AOI (Area of Interest) Function
Programmable AOI setting via the communication
Smear Reduction
Selectable ON/OFF via the communication
Color Interpolation
N/A
White Balance
N/A
Trigger Mode
Edge preset trigger, pulse width trigger (unlimited exposure time)
Communication
UART communication through Ethernet Port
I/Os
One opt isolated input and two open collector outputs
Power
-
- Input Voltage
+10.8 to +26.4Vdc through power/IO connector or Power Over Ethernet; (Auto detection with power/IO connector prioritized)
- Consumption
12V: 3.2W / 2.9W, PoE: 3.4W / 3.1W
Dimensions
35 (W) x 35 (H) x 57.3 (D) mm excluding connectors
Optical Filter
No filter
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.3 mm; Rotational accuracy of H and V: +/- 1.5 deg.
Material
Aluminum (AC)
Lens Mount
C Mount
Connectors
RJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount Screws
Two ¼” Tripod screw holes (one each on top and bottom plate); Twelve M4 screw holes (four each on top, bottom, and two each on both side plates)
Weight
Approx. 130
Operating Temperature
 
- Minimum
Environmental Temperature: -5 deg. C
- Maximum
Environmental Temperature: 35 deg. C or camera housing temperature (Top Plate) : 65 deg. C
Storage Temperature
Environmental Temperature: -30 to 65 deg. C
Vibration
20Hz to 200Hz to 20Hz (5min/cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions, 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS compliant

 

pdf-icon.png

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review