Loading... Please wait...
RMA Electronics
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Sentech STC-MBCM200U3V-NIR 2/3" CMOS (CMOSIS CMV2000) Progressive Scan Cased Monochrome Camera, 2.2 Megapixels, 2048 H x 1088 V, 167 fps, C-Mount, USB 3.0 Output, USB3 Vision, NIR Type

$948.00
Model #:
SENT STC-MBCM200U3V-NIR
Availability:
Typically 4-6 weeks lead-time
Shipping:
Calculated at checkout
Quantity:

Technical Information

Resolution:  2048 H x 1088 V (CMOSIS CMV2000 Sensor)

Imager Size: 2/3"

Output: USB3.0 (USB3 Vision)

Color/Monochrome: Monochrome

Mount: C-Mount

 sentech-logo.jpg

Additional Information

USB 3.0 Vision CMOS, 2 MP, Mono, Cased

The STC-MBCM200U3V monochrome camera with an CMOSIS sensor supports the USB 3 Vision standard proposed by the Automated Imaging Association. Vision control software/libraries that support USB3 Vision can deploy their own USB3 Vision-compliant driver to control the camera. Otherwise, Sentech also provides its own driver and SDK for users to build their own application. A GenTL Common Transport Interface (CTI) layer is also provided. USB3 Vision GeniCam Compliance This product conforms to the USB3 Vision GeniCam standard.

 

Imaging

Model No

STC-MBCM200U3V

Image Sensor

2/3" 2MP Monochrome CMOS (CMOSIS: CMV2000)

Active Picture Element

2048 (H) x 1088 (V)

Cell Size

5.5 (H) x 5.5 (V) μm

 

Function

Scanning System

Progressive

Shutter Type

Global Shutter

Scanning Mode

Full Scanning, Variable ROI (Horizontal and Vertical)

Maximum Frame Rate (Full Scanning Rate)

2M: 2048 x 1080: 167fps (Raw 8bit); Frame rate will drop if connected with the USB 2.0 port

Maximum Frame Rate (AOI Mode)

1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps

Sync System

Internal

Video Output Format

RAW 8bit / 10bit / 12bit (Default Raw 8bit)

S/N Ratio

Less than TBD digit (Gain 0 dB)

Minimum Scene Illumination

TBD

Electronic Shutter

Preset Free-run Mode: Exposure Time 22 nsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 nsec to 16 sec (in full scanning mode)

Gain

-

- Analog (Gain)

Not supported

- Digital (Gain)

0 ~ 13.9 dB (Default 0dB)

Offset (Analog)

0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit

ROI

ROI (Horizontal:32 to 2048 pixels / Vertical:32 to 1088 lines); (Default: 2048 x 1088) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction

Binning Function

Individual x2, x4 Horizontal, Vertical Binning (Frame rate does not increase)

Decimation Function

Individual x2, x4 Horizontal, Vertical Decimation (Frame rate may increase on Vertical)

ALC

AE, AGC (Default AE:OFF, AGC:OFF

White Balance

N/A

HDR

Supported

Mirror Image

Horizontal / Vertical / Horizontal and Vertical (Default: OFF)

Pixel Defect Correction

Up to 64 pixels (Default: ON)

Operational Mode

Free-run / Edge-Preset Trigger / Pulse Width Trigger

User Setting Storage

Supported

Interface

USB 3.0 Super Speed (USB 3.0 Micro B)

Input / Output

Three GPIO, One Camera Hardware Reset

Power

-

- Input Voltage

+5V (typ.) (Conform to USB Standard)

- Communication

Less than TBD W

 

Mechanical

Dimensions

C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors

Lens Mount

C Mount

Optical Filter

No IR cut filter

Optical Center Accuracy

Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg.

Weight

Approx. 52g

Interface Connector

USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent

 

Environmental

Operating Temperature

-

- Minimum

Environmental Temperature: -5°C

- Maximum

Camera housing temperature (top plate) shall not exceed 55°C

Storage Temperature

Environmental Temperature: - 30 ~ 65°C

Vibration

20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each

Shock

Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each

Standard Compliancy

TBD (EMS: EN61000-6-2, EMI: EN55011)

RoHS

RoHS Compliant

 

 

Downloads          

pdf-icon.png

Sentech STC-MBCM200U3V-NIR Datasheet(PDF)

 

 

USB 3.0 CABLES ACTIVE OPTICAL CABLE (AOC) FOR EXTENDED DISTANCES

USB-HYA0B3-SL-0100M Senko 10 Meter AOC USB3 Cable, Standard A to Micro-B with Locking Screws, High Flex Type, 5 Gbps Transfer Rate, Provides 900mA/5V Power to Device  New! $427.00 -shoppingcartred.png
USB-HYA0B3-SL-0200M  Senko 20 Meter AOC USB3 Cable, Standard A to Micro-B with Locking Screws, High Flex Type, 5 Gbps Transfer Rate, Provides 900mA/5V Power to Device  New! $475.00 -shoppingcartred.png

 

USB 3.0 CABLES TRANSFER RATES UP TO 5 GBPS

B3PMBT-2.0-PA Intercon 2-Meter USB 3.0 Cable with Thumbscrew Locking (to Camera) $25.00 -shoppingcartred.png
B3PMBT-3.0-PA Intercon 3-Meter USB 3.0 Cable with Thumbscrew Locking (to Camera) $26.00 -shoppingcartred.png
B3PMBT-5.0-PA Intercon 5-Meter USB 3.0 Cable with Thumbscrew Locking (to Camera) $28.00 -shoppingcartred.png

 

 

← Back to Sentech Camera Page

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review