iShot XBlock EM18624 3G-SDI (1080p/60) and HD-SDI Interface Board Kit for Sony FCB-EV Series HD Block Cameras
Note: Sony industrial block cameras are designed to be OEM products and require integration with an interface board for allowing a specific HD video output type. This is not designed to be an end user type product. Sony industrial block cameras and interface boards are considered to be special order and as such are non-returnable.
- 3G HDSDI output for FCB EV Sony block cameras, FCB-EV7500 and FCB-EV7100
- HDSDI output for FCB-EV5500 FCB EH Sony block cameras, FCB-EH6500, FCB-EH6300, FCB-EH3410
- 3G HDSDI output for Panasonic GP-MH330-2S, GP-MH326-2S, GP-MH322-2S
- BNC to MCX cable
- Depending on camera model, component and SD composite analog video outputs available
- Camera video standard is coded with switches and a serial link (RS232 or TTL level) allows control of camera and audio setting.
- RS232 to/from TTL conversion for external control
- LVDS decoding to 16 bit parallel BT656 video bus (FPGA)
- Video and audio multiplexing, serialization and SDI signal generation (SDI serializer)
- 6 to 12V DC camera power supply and 1.2V and 3.3V voltage generation
The 3GSDI / HD-SDI Interface board provides camera control for the Sony FCB EV Series of Block Cameras and HDSDI camera control for the EH Block cameras. Depending on the camera model, component and SD composite analog video outputs are available. The camera video standard is coded with switches and a serial link (RS232 or TTL level) allowing control of camera and audio setting. 6 to 12V DC camera power supply.
3G HDSDI output for FCB EV Sony block cameras, FCB-EV7500 and FCB-EV7100
3G HDSDI output for Panasonic GP-MH330-2S, GP-MH326-2S, GP-MH322-2S
HDSDI output for FCB-EV5500 FCB EH Sony block cameras, FCB-EH6500, FCB-EH6300, FCB-EH3410
- SMPTE-424M 3G HDSDI Digital Interface
- BNC to MCX cable
- Automatic SONY camera recognition
- Analog HD and SD video output.
- Enhanced HDSDI signal quality : LOW jitter
- Video format selection by micro switch.
- Embedded Color bar & pathologic charts &
- Embedded cross reticule
- TTL or RS232 VISCA dialog level.
- 6 to 12 VDC protected and EMC filtered power supply for interface and camera
3GSDI/HDSDI Interface board Kit includes interface board, BNC to MCX cable, right angle black anodized aluminum plate, 10 Pin Harness 8.25 inches, 2 Pin Harness 8.25 inches, Ribbon Cable 6.075 inches, 30 Pin Kel Cable 5 inches, 10 screws, and 3 standoffs.