Questions? Feedback? powered by Olark live chat software

iShot XBlock EM14041 6G-SDI Interface Board and Cabling Kit for 4K Sony FCB-ER8550, FCB-ER85030, and FCB-ER8320 Cameras

Typically 3-5 days
Current Stock:

Note: Sony industrial block cameras are designed to be OEM products and require integration with an interface board for allowing a specific HD video output type. This is not designed to be an end user type product. Sony industrial block cameras and interface boards are considered to be special order and as such are non-returnable.



  • Digital TMDS video input from Sony FCB-ER8300
  • 6G-SDI (SMPTE ST2081) digital video output
  • Supports 4k resolution - 2160p25/29.97Hz
  • Supports 1080p50/59.94, 1080p25/29.97, 720p 50/59.94
  • Video format selection by micro switch
  • Board and camera management via RS232/TTL
  • BNC connector (SMB, MCX in option)
  • Power supply : 6 to 12 VDC, 6 W ( including camera)
  • Dimensions (W x L x H): 65mm x 55mm x 20mm 




The 6G-SDI interface board for the Sony 4K FCB-ER8300 can output the camera 4K image or a region of interest in 720p or 1080p (1080p50/59.94, 1080p25/29.97, 720p 50/59.94). You can move the region of interest position within the 4K image and switch instantaniously from one to the other with out restarting the camera.

The new iShot® 6G-SDI module converts the native video signal from the Sony FCB-ER8300 camera block into 6G-SDI standard. All the camera resolutions and frame rates are supported. Take advantage of the full range of HD resolutions the Sony 4k camera offers (up to 2160p 29.97) and much more...




Digital video output SDI output Connector Sync input Video format Video format configuration Camera communication & settings Power supply Operating temperature range Regulation Dimensions (mm)

P/N - TV50 0008


USL20-30SS-012-C Cable assembly
2 way harness, 200mm long for power
3 way harness, 200mm long for communication
6G-SDI Connector Options BNC

✓ ✓ ✓


6G-SDI Ext Sync Interface board for Sony FCB-ER range &


➢BNC by default - MCX in option
➢Molex connector – ➢BNC,SMB, MCX connector optional Up to 2160p29.97
➢DIP switches
➢VISCA – ➢Default: RS232 level – TTL level (Option)
➢0°C to 60°C

➢ SDI output SMPTE 292M, SMPTE 274M, SMPTE ST-2081
➢ Compatible with SONY ER8230, ER8300, ER8530 and ER8550 4K Camera Block
➢ Support external synchronization input
➢ Support external Synchronization output (not yet implemented)
➢ Generates synchronization signal for another TV10 0080 Board (not yet implemented)
➢ Serial communication TTL or RS232
➢ System control through VISCA protocol Camera Management
➢ BNC, SMB or MCX optional connector for SDI output and Synch Input ➢ Led Status indicator