Loading... Please wait...
WORLDWIDE DISTRIBUTOR OF INDUSTRIAL VIDEO PRODUCTS RMA Electronics
35 Pond Park Road. Unit #12  |  Hingham, MA 02043 USA  |  +1(781)-749-9700  |  info@rmaelectronics.com
  • My Account

Euresys 3602 Coaxlink Octo Image acquistion board for up to eight CoaXPress cameras; 50 Gbit/s; eight CXP-6 connections; 10 digital IO lines, PCIe 3.0 (Gen 3) x 8 bus at 6.7 GBs/sec.

Model #
EUR 3602
Availability
Typically 2-4 days lead-time
Shipping
Calculated at checkout
$2,599.00
Quantity


Technical Information

euresyslogo.jpg

 

Input: CoaXPress

Bus:  PCIe 3.0 (Gen 3) x 4 bus at 6.7 Gbyte/s

# Cameras: 8

Connectors: 8x DIN1.0/2.3 CXP-6

 

Coaxlink Octo

PCIe 3.0 eight-connection CoaXPress frame grabber

AT A GLANCE

  • Eight CoaXPress CXP-6 connections: 5,000 MB/s camera bandwidth
  • Connect up to eight CoaXPress cameras to one card
  • PCIe 3.0 (Gen 3) x8 bus: 6,700 MB/s bus bandwidth
  • Feature-rich set of 10 digital I/O lines
  • Extensive camera control functions
  • Memento Event Logging Tool

 

Downloads:                             

pdf-icon.pngEuresys 3602 Coaxlink Octo Datasheet (PDF)

pdf-icon.pngCoaXPress 2.0 Brochure (PDF)

 

Mechanical
Form Factor PCI Express card
Format Standard profile, half length, 8-lane PCI Express card
Cooling method Air cooling, fan-cooled heatsink
Mounting For insertion in a standard height, 8-lane or higher, PCI Express card slot
Connectors
  • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:
    • 8x DIN 1.0/2.3 female connectors
    • CoaXpress host interface
  • 'INTERNAL I/O' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'I/O EXTENSION' on PCB:
    • 26-pin 2-row 0.05" pitch pin header with shrouding
    • I/O extension lines and power output
  • 'AUXILIARY POWER INPUT' on PCB:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on PCB:
    • 6-pin 2-row 0.1-in header
    • Card to card link
Lamp indicators
  • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:
    • 8x bi-color red/green LEDs
    • CoaXPress Host connector indicator lamps
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status lamp
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
Switches 'RECOVERY' on card PCB:
  • 3-pin 1-row 0.1" header
  • Firmware emergency recovery
Dimensions L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight 189 g, 6.67 oz
Host bus
Standard PCI Express 3.0
Link width
  • 8 lanes
  • 1 lane, 2 lanes or 4 lanes with reduced performance
Link speed
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
Maximum payload size 512 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 7,800 MB/s
Effective (sustained) delivery bandwidth 6,700 MB/s (Host PC motherboard dependent)
Power consumption Typ. 22 W (TBD W @ +3.3V,TBD W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s) CoaXPress 1.0 and 1.1
Connectors 8x DIN1.0/2.3 CXP-6
Status LEDs 1 CoaXPress Host connection status per connector
Number of cameras
  • Area-scan cameras:
    • One 1- or 2- or 4- or 8-connection (1)
    • Two 1- or 2- or 4-connection
    • Four 1- or 2-connection (1)
    • Four 1-connection + one 1- or 2- or 4-connection (1)
    • Eight 1-connection
  • Line-scan cameras:
    • One 1- or 2- or 4- or 8-connection (1)
    • Two 1- or 2- or 4-connection (1)
    • Four 1- or 2-connection (1)
    • Four 1-connection + one 1- or 2- or 4-connection (1)
    • Eight 1-connection (1)
(1) Refer to release notes for availbility
Line-scan cameras supported Yes
Maximum aggregated camera data transfer rate 50 Gbit/s (5,000 MB/s)
Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
Number of CXP data streams (per camera) 1 data stream per camera
Maximum CXP stream packet size 16,384 bytes
PoCXP (Power over CoaXPress)
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types
  • Area-scan cameras:
    • Gray-scale and color (RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras:
    • Gray-scale and color RGB
Camera pixel formats supported Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
Line-scan camera control
Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
Line strobe
  • Accurate control of the strobe position for strobed light sources.
On-board processing
On-board memory 2 GB
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
Input LUT (Lookup Table)
  • Available for monochrome cameras
    • 8 to 8 bits
    • 10 to 8, 10 or 16 bits
    • 12 to 8, 12 or 16 bits
General Purpose Inputs and Outputs
Number of lines 10 I/O lines on INTERNAL I/O connector:
  • 2 differential inputs (DIN)
  • 2 singled-ended TTL inputs/outputs (TTLIO)
  • 4 isolated inputs (IIN)
  • 2 isolated outputs (IOUT)
NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
  • The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
Electrical specifications
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns,1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control Yes
Power output
  • From AUXILIARY POWER connector to INTERNAL I/O and I/O EXTENSION connectors:
    • Non-isolated +12V, 1A, with electronic fuse protection
  • From PCI Express connector io I/O EXTENSION connector:
    • Non-isolated, +3.3V, unprotected
I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
  • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): A composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
I/O Toolbox composition 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS
C2C-Link
Description
  • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan and line-scan cameras.
  • C2C-Link is able to synchronize cameras connected
    • to the same Coaxlink card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
Specification
  • Maximum distance
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices
    • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC
    • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) processor architecture
Refer to release notes for details
APIs EGrabber class, with C++ and .NET APIs:
  • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher
GenICam GenTL producer libraries compatible with C/C++ compilers:
  • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications
  • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications
  • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications
Memento Compatible with Memento Event Logging tool
Environmental conditions
Operating ambient air temperature 0 to +55 °C / +32 to +131 °F
Operating ambient air humidity 10 to 90% RH non-condensing
Storage ambient air temperature -20 to +70 °C / -4 to +158 °F
Storage ambient air humidity 10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-6
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2011/65/EU (ROHS2)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations

 

WHAT IS CUSTOM LOGIC?

CustomLogic is an FPGA design kit enabling the design and upload of FPGA code to a Coaxlink board. It is compatible with the Coaxlink Octo and Coaxlink Quad CXP-12. Up to 70% of their Xilinx Kintex Ultrascale XCKU035 FPGA resources are available. The design phase uses the Xilinx Vivado development tools (not provided).

 

AT A GLANCE

  • FPGA design kit enabling the design and upload of FPGA code to a Coaxlink board
  • Supported by Xilinx Vivado development tool
  • Compatible with Coaxlink Octo and Coaxlink Quad CXP-12: 70% of Xilinx Kintex Ultrascale XCKU035 FPGA resources available
  • Access to CoaXPress camera pixel stream, on-board DDR4 memory and PCIe Gen3 connectivity
  • Memento Event Logging messaging

 

 

← Back to Euresys Video Capture Page

 



Join Our Newsletter

Contact

 +1 (781) 749-9700
 info@rmaelectronics.com

  Address

RMA Electronics, Inc.

35 Pond Park Road. Unit #12

Hingham, Ma 02043 USA


We accept Mastercard, Visa, AMEX, Amazon Pay and Paypal

Attention Customers: We take fraudulent online activity very seriously and will pursue all such matters.

All prices are in USD Copyright 2020 RMA Electronics, INC.

Go Top